Salomon S Lab Shift 10 MNC Black ski bindings 2021 model
Salomon S Lab Shift 10 MNC Black ski bindings the Salomon Shift is a cross-over tech binding in the new lower DIN for 2021
By utilising a Pin toe for touring and a true alpine toe and heel for skiing, the Shift is the obvious choice for touring bindings.
Featuring best in class downhill performance, you will forget you are on a touring binding from the moment you step in.
for the lighter weight skier who doesn’t require a DIN of 13
MNC certification allows for the use of any ski boot (DIN certified) on the market.
If you want a single touring binding that can ski hard and tour efficiently, the Shift is the one.
- DIN Range: 4-10
- Brake Sizes: 90mm, 100mm, 110mm, 120mm (We recommend going the brake size closest to your ski width, i.e. 100mm brake for 95mm-104mm waisted skis)
- Adjustment range: 30mm
- Climbing Aides: 2° & 10°
- TUV Certified
- MNC – Multi-Norm Compatible
Multi Norm Certification (MNC)
Dual Mode Toepiece – MNC (Multi-Norm Certified) for skiing, including Alpine, Grip Walk, WTR, and ISO 9523 soles. Converts to a tech toe for touring (requires a boot with tech toe fittings).
Automatic Wing Adjustment – Automatic adjustment just by stepping-in. You can forget but nevertheless trust your binding!
Toe Height Adjustment – Adjustable toe height to let you switch between different boot norms.
Easy Step-In – Less effort needed to step-in and out of bindings
XL Wings – Long wings for a great envelopment of the boots.
Lateral Elasticity – 47mm
Sliding Toe Pedal
Freeski Brakes – Self-retracting brakes for a close position to the heel so they never catch.
Hike and Ride Switch – Lever at toe shifts between hike and ski mode.
Accessing Toe for Touring – 1. Pull back on block between toe wings to open tech arms. 2. Depress front lever to widen arms to step in. 3. Pull up on lever to lock arms securely for skinning.
Preparing Heel for Touring – Pull back on the brake pad and fix the brake in the “up” position by stepping down on the pad.
Climbing Aids – 2° & 10°
MNC (Multi-Norm Certified) – Certified for use with ISO 5355 Alpine, ISO 9523 Alpine Touring, and WTR (Walk To Ride) boots.
Tech Toe Fittings Required For Use In Uphill (Touring) Mode
Requires Boot with Full Heel and Toe Lugs – Not compatible with boots like the Dynafit Hoji Pro Tour and TLT, Atomic Backland, Salomon X-Alp and Arc’teryx Procline, among others. These boots have shortened or non-existent lugs and will not fit into the Shift in downhill mode.
Low Profile Chassis – Low stand height for increased terrain feedback and enhanced power transmission.
Oversized Platform – Wide footprint and double aluminum frame tubes create a super strong interface between boot and ski. Ensures maximum lateral power transmission.
+Elastic Travel – Ultimate elastic travel to hold in boots during impact in order to go bigger with no risk of pre-release.
Compatible with Salomon S/LAB Shift Crampons
Carbon-Infused PA Construction
Adjustment Range – 30mm
Height – 30mm
We recommend a brake width equal to or at most 10 mm wider than the ski waist width.
- Ability Level:Intermediate-Advanced
- DIN / Release Value Low:4
- DIN / Release Value High:10
- Boot Sole Type:Alpine DIN (ISO 5355), Alpine Touring (ISO 9523), Tech, Walk to Ride (WTR), GripWalk
- Warranty:2 Years
|Indiv. Binding Weight (g)||865||865||865||865|